c Unit (DECU)

c Unit (DECU)

-PATENT PENDING-

HEPA filtration & decontamination
Controlled heating & drying
Humidity control

Fluid-to-air heat transfer

  • The DECU1000 is a fan-coil type liquid-to-air heat exchanger with high efficiency air filtering capabilities and a full, versatile control system
  • For drying application, the DECU1000 can be connected to any of DRYAIR’s Central Heating Modules
  • Temperature controls can sense temperature of either the supply air stream or the return air stream and can be selected at the flick of a switch. This allows versatile setup on different DECU applications (ie: structure pressurization or circulation within a structure)
  • Blower speed and air flow will continue even when heat is not being called for
  • A differential air-pressure gauge indicates reduced airflow due to dirty filters. By replacing the 2 pre-filters frequently, the life of the other more expensive filters will be prolonged. Utilize all 4 filters at once or, if not required, certain ones can be removed
  • The relative humidity low limit can be selected. If the RH level of the return air stream should get down to the set point, the heat supply will be shut off while the blower will continue to run. When the sensed RH level rises above the low limit set point, heat will be allowed to come back on
  • Stainless steel cabinetry… the system can be washed-down between uses and can be used indoor or outdoors
  • 1,000 CFM nominal air flow (at full blower speed, with clean filters)
  • Electrical requirements – 115V, single phase, 60Hz, 15A, standard plug
  • Filtration Multi-level, bank of 4 media filters
    • 1st filter 1″ thick, conventional throw-away
    • 2nd filter 4″ thick, pleated, MERV 8 rating
    • 3rd filter 4″ thick pleated, activated carbon, capable of removing gaseous airborne odors
    • 4th filter 12″ thick HEPA filter, capable of removing 99.99% of airborne particles as small as 0.3 microns in diameter
  • Ultra violet light – optional, used to sanitize the air stream of biological impurities.

Related posts

Humidistat

Humidistat

The humidistat, inserted in-line between the power supply and the powered heat exchanger(s), controls humidity levels on a project The humidity...

600 RTS GreenDry System

600 RTS GreenDry System

Industry leading multi-loop ground thaw set-up for job site flexibility and optimum fluid circulation & heat transfer. Largest capacity...

c Unit (DECU)

c Unit (DECU)

The DECU1000 is a fan-coil type liquid-to-air heat exchanger with high efficiency air filtering capabilities and a full, versatile control...