Features

• The 5T Air Handler Unit is a versatile air handler that is ideal for year-round climate control applications such as cooling, heating, and drying.
• The ultra-compact and mobile design allows the air handler to be used where required, even where space is limited.
• The fan operates on a 120 Volt 15 amp circuit, allowing the air handler to be used anywhere there is electricity.
• The compact size and low power requirements allow the air handler to meet the needs of remote locations.
• High-volume air flow ensures there is even air temperature throughout the structure.
• User-friendly thermostatic and speed controls to maintain desired conditions and maximize efficiency. An optional humidistat available if required.
• Integrated condensate pump for automatic collection and removal of condensate from the environment.

Cooling

• Connect several air handlers to a chiller to achieve your cooling needs.
• The 5T Air Handler Unit is designed with an oversize coil to maximize efficiency. Cooling targets are achieved with less water and airflow per ton of cooling.
• The oversize coil is only three cores thick, which minimizes the air pressure drop across the coil to maximize fan output.

Heating

• When winter comes, the hydronic air handler delivers clean, low-humidity air. With a DryAir hydronic heating system, energy costs are minimized as warm inside air is re-heated, rather than heating cold outside air, like other systems.

Drying

• When drying, the low humidity environment produced by the air handler saves time and money for contractors with jobs such as: interior drywall, paint and coatings.

Features

• The DryAir 25T Air Handler Unit is ideal for year-round climate control applications such as cooling, heating and drying.
• The compact and mobile design with 8” casters allows the air handler to be moved through a 36” doorway to be positioned where required on the job site.
• The fans operate on two 120 Volt 20 amp circuits, allowing the air handler to be used anywhere there is electricity.
• The 25T Air Handler Unit can be paired with two 20” ducts to move air into remote locations.
• High volume air flow ensures there is even air temperature throughout the structure
• User-friendly, thermostatic and speed controls to maintain desired conditions and maximize efficiency. Optional humidistat available, if required.
• Integrated condensate pump for automatic collection and removal of condensate from the air handler.
• Integrated tie-downs and stackable design for static storage.

Cooling

• Connect several Air Handler Units to a chiller to achieve your cooling needs.
• The 25T Air Handler Unit is designed with an oversize coil to maximize efficiency. Cooling targets are achieved with less water and airflow per ton of cooling.
• The oversize coil is only three cores thick, which minimizes the air pressure drop across the coil to maximize fan output.

Heating

• When winter comes, the hydronic air handler delivers clean, low-humidity air. With a DryAir hydronic heating system, energy costs are minimized as warm inside air is re-heated, rather than heating cold outside air, like other systems.

Drying

• When drying, the low humidity environment produced by the air handler saves time and money for contractors with jobs such as: interior drywall, paint and coatings.

Features of the 2000 HHP-E Hydro Heat Pro Electric

• The 2000 HHP-E Hydro Heat Pro Electric is an electric-powered hydronic heating system, delivering 2 MMBTU of fluid heating output, which is equivalent to a 59 HP boiler.
• At its core, the system uses two 1 MMBTU electric water heaters, open to atmosphere, working in tandem to safely and efficiently heat a food-grade glycol solution. As a result, heat is delivered precisely where it is required.
• System operation is centrally managed through a user-friendly, DryAir-exclusive control panel, which features thirty 20 kW heating stages (15 stages per heater). In addition, integrated digital temperature control enables automatic stage drop-off as loads decrease, thereby improving efficiency.
• To further enhance flexibility, the system includes two independent output circulation systems: one dedicated to potable water and one for process water. Each system is equipped with its own fluid-to-fluid plate heat exchanger, pump, and plumbing components, effectively eliminating contamination risks. Individually, each output system is capable of heating and circulating the full 2 million BTU, or alternatively, they may operate in tandem.
• Considerate component layout and trailer access design ensure that general maintenance and plate heat exchanger servicing are convenient and practical. Mobile for easy transport, setup and storage.
• For operational visibility, an on-board power meter displays amps, kW, and kVA. Meanwhile, remote monitoring enables wireless recording and viewing of operational data.

Applications

• Data center heat load and load bank testing for commissioning and preventative maintenance.
• Boiler tie-in/bypass, heating and circulating a building’s heating fluid for potable hot water and building heat.
• Processing plants, mining and oil field projects and temporary worksite camps for the heating and circulating of water.
• Wash facilities for post-disaster temporary shelters, multi-day events and gatherings.
• For jobs requiring more than 2 MMBTU (59 HP), additional capacity can be achieved by connecting multiple 2000 HHP-E Hydro Heat Pro electric units in series

The Multimax System delivers up to 7 million BTU’s of heat to the tank for fluid heating or frost prevention using:

• 4x 900 Central Heating Units (CHUs)
• Has a proprietary boosting system
• Large stainless steel heat plates

The 2100 series 600 DG Heating Module from DryAir provides up to 620,200 BTU’s of heating power in a small and portable unit that is easy to place on the jobsite.

The 2100 series 600 DG Heating Module runs on Diesel Fuel or #1 & 2 Heating Oil only where the 600 CHU Tri-fuel Version comes standard with a Diesel burner but can also be configured to run on natural gas or propane.

Innovative Combustion Environment Control System

• Preheat’s the fuel and air used for combustion
  • Allows the unit to start & run even in sub 40 degree conditions
  • No need to adjust the burner for changing weather conditions, burner always receives warm air and fuel for optimum combustion, efficiency and reliability.

Temperature Control & Fuel usage is automatic

An 8 – light operation panel monitors all functions

Fluid circulation system is low pressure and atmospherically vented. There is no chance of an explosion or line burst due to pressure build up.

Targeted to meet industry fluid heating applications

The 1.8 million BTU Hydro Heat Pro combines the heating power of the efficient DryAir water heater and two plate heat exchangers into one ready to move, trailer package.

Features:

• Two plate heat exchangers, each with 2 million Btu/hr capacity are capable of handling 100% of the output from the water heater. This allows one plate heat exchanger loop to remain dedicated to heating potable water without the risk of contamination.
• The two plate heat exchangers are capable of heating two different fluids simultaneously.
• Each plate heat exchanger has a pump to circulate the heated fluid to its respective output loop.
• Tri-fuel capable (diesel, natural gas and propane). Switch fuels with a quick burner change-out.
• Convenient designated storage is provided for the burners that are not in use.
• The 1800 HHP starts and operates efficiently all the way down to – 40°F, thanks to the innovative DryAir Combustion Environment Control (CEC) system.

Specific applications:

• Acting as a boiler tie-in, to heat and circulate a building’s heating fluid for potable hot water and building heat.
• Heating and circulating potable hot water in a building complex, bypassing the building’s boiler/water heating system.
• Heating and circulating water for washing facilities at large multiple day events and gatherings.
• The heating and circulating of water for processing plants, mining and oil field projects.
• For larger jobs, where one DryAir heating unit is not adequate, the Hydro Heat Pro’s plate heat exchanger can be connected in series to boost output.

Note: The purpose of a plate heat exchanger is to transfer heat between two fluids, without the fluids mixing.

Providing heat along with a fully enclosed trailer to carry all the accessories inside, the Heat Center Pro offers greater convenience with the same fuel efficiency of our other modular hydronic heating systems.

• Room to store heat exchangers within the trailer:
  • 4 – HEFA 200 Fan Coils (200,000 btu) or
  • 9 – HEFA 80 Fan Coils (80,000 btu)
• Folding, locking arms to secure all heat exchangers inside
• A fold-down, loading-ramp door finished with a non-skid surface
• DryAir’s innovative fuel and air-heater
• The Heat Center Pro has the ability to hold up to 4,000′ of hose for concrete curing, frost prevention, heat tracing or ground thawing