-
BHE 1M Bayonet Heat Exchanger
Technical Specs:
- BTU output – 1,000,000 BTU/H
- Based on 80°F/27°C Fluid Temp
- Operating Pressure – 38 PSI
- Weight – 368LBS. (167 KG)
- Dimensions – 66″L x 30″W x 42″H
- Fluid Lines – 2″ cam lock couplers w/ shutoff valves
BHE 1M Bayonet Heat Exchanger – Patent Pending
- BTU output – 1,000,000 BTU/H
-
Mini Plate
Technical Specs:
- OUTPUT BTU/H – 60,000 @ 40F Water
- OPERATING PRESSURE – 25-35 p.s.i.
- DIMENSIONS – 18″W x 32″L x 5″D
- WEIGHT – 37 lbs (17 KG) Wet
- COUPLERS – 3/4″ or 1″ Quick Connects
-
Mega Plate
Technical Specs:
- OUTPUT BTU/H – 270,000 @ 50F Water Temp
- OPERATING PRESSURE – 25-35 p.s.i.
- DIMENSIONS – 48″W x 72″L x 5″D
- WEIGHT – 170 lbs ( 77KG) Wet
- COUPLERS – 1-1/2″” Kamlocks
-
Generators – Diesel Fired
Technical Specs:
- OUTPUT – 120/240V, 1Ph, 60hz
- STANDBY POWER KW/H – 7
- PRIME POWER – 6
-
SmartThaw System – STS 100
Technical Specs:
- Electrical requirements – 115V, single phase, 15A.
- Controls – electro-mechanical timer controls the switching of motorized valves.
- Fluid Circulation – can be incoporated to all DryAir systems
- 2″, 50mm Kamlock quick coupler fluid line connections
- 1″, 25mm Quick coupler adapters available
-
Mixing Booster – MB 100
Technical Specs:
- Electrical requirements – 115V, single phase, 15A
- Controls & Monitoring
- Aquastat – temperature set
- Supply and return temperature gauges
- Pump control switch – on – off
- Modulating/ mixing valve
- Dimensions – 50″L x 18″W x 20H
-
Humidistat
Technical Specs:
The humidistat, inserted in-line between the power supply and the powered heat exchanger(s), controls humidity levels on a projectThe humidity level set point has a full range of adjustment. -
Hose Reels
Technical Specs:
Hose storage with unique” auto-feed system makes laying out hose on a job site a one-man operation… -
Plate Heat Exchanger – HEFF 1M Series II
Technical Specs:
Heat delivery on a muti-storied project while still keeping the heat source at ground level. Heat transfer fluid can be circulate up to 70 feet (21 M) above the central heating module´s elevation utilizing our standard primary fluid lines. -
Fluid Circulation Components
Technical Specs:
- Primary and secondary circulation lines
- fluid distribution manifolds
- All fluid distribution system components employ quick-coupler connections and remains fully charged for quick setup-and-go operation.
- An assortment of tees and fittings are also available… allowing the widest range of setup possibilities.
